It's a mad, mad, mad world

We are in the mad rush stage for the Saturday afternoon cookout now.  Last night:

• Routed the T-molding channel on cabinet and control panel.
• Two coats of paint on the cabinet and what I had done
• Primed everything else: bezel, door, floor
• Cut door
• Routed relief cuts for joysticks(went 1/8th too deep on one, but I'll put in a layer of 1/8 plexi just to level it.
• Worked on trackball cutout.
• This morning put second coat on everything with one coat and first coat on primed items.

Tonight:

• Second coat on control panel, door, and bezel
• While that dries
• Cut button hole for power on back of cabinet
• Install light up top and weather strip around to prevent light leakage
• Install T-molding on cabinet
• Install top
• Install marquee with holder
• Hack power button on computer to button in cabinet.
• After dry
• Install T-molding on control panel
• Route out Trackball insert
• 2 1/8" hole from top
• 1/4" roundover from top
• 1/2" depth relief area on bottom for unit base
• 1/2" chamfer route from bottom to allow free movement of ball
• Prime trackball hole to seal MDF
• Install door with Tot-lock magnetic lock
• Wire panel
• Run around world at light speed + like Superman to reverse time and allow for more time to complete:)

Pictures tomorrow.